TeraNIM™ - Aerospace
Composite Inspection
Subsurface Defect Detection
High-Resolution Imaging
Aerospace applications with THz technology
Coating Thickness
Multi-Layer Coating
Defect Detection in Composites
Silica Material Inspection
TBC Coating Inspection
Phenolic Paper Tube Inspection
Composite Coating Inspection
TeraNIM™ – Aerospace enables reliable verification of bond integrity between composite coatings and the underlying substrate.
Ideal for low-density coatings above 20 µm, including silica, rubber, and inhibitor materials
Accurate measurement of coating thickness and non-uniform buildup on curved components
Verification of insulation coating-to-substrate bond integrity
Multi-Layer Thickness Measurement
TeraNIM™ – Aerospace is capable of measuring thermal barrier coatings (TBCs) to assess structural integrity.
Measurement of 2–3 coating layers
Micron-level resolution and accuracy
Non-contact, real-time measurements
Ideal for non-conductive coating materials
Sub-Surface Defect Imaging
TeraNIM™ – Aerospace is ideally suited for defect imaging in phenolic paper tubes, foam-based structures, resin systems, aramid composites, and FRP materials.
Detection of internal cracks, voids, inclusions, and delamination in FRP
Identification of surface and subsurface defects with high-resolution imaging
A powerful Terahertz Lumen GO software package supports real-time acquisition, measurement, and advanced data analysis.
Wizard-based guided workflow for fast start-up
Visualization of THz time-domain pulse (A-scan), B-scan, and C-scan
Dedicated thickness measurement module for coating applications
Extraction of dielectric properties and material characteristics
Access to both time-domain and frequency-domain signals
Integration capability with automation systems for large aerospace structures
Easy data storage, report generation, diagnostics, and troubleshooting
Multi-Layer Measurement
- All Dielectric materials can be measured
- Measure thickness of each layer individually
- Compact and mobile
Efficacious and Accurate
- Real Time Measurement
- Non-Contact Measurement
- Accuracy with 0.1μm
User-Friendly Integration
- Offline system
- In-line system
- Auto Data saving and report generation
Safety First
- Terahertz waves are harmless to humans
- No protection required
- No moving parts
Terahertz Specification
| Spectral Range | 0.5 – 3.5 THz |
|---|---|
Dynamic Range |
> 50 dB |
Average Power |
100μW |
Total Scan Range |
330 ps to 600 ps, and can extend up to 1200 ps depending on the application |
Scan Speed |
> 5ps/s |
THZ Frequency Resolution |
< 1.2GHz |
Laser Outputs Ports |
1550 nm, FC/APC, PM fibre |
Imaging Specification
| Travel Range | 75 mm x 75 mm x 75 mm ( customizable ) |
|---|---|
Resolution X – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Y – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Z – Axis |
Stage resolution < 10 μm |
Speed |
10 mm/sec |
Sensor Integration |
Camera / Depth Sensor / Laser |
Note: Turnkey system is customizable based on application requirements.
- Download TeraNIM™ Brochure
TeraNIM™ - Automotive
Multi-Layer Paint Coating Inspection
|
Non-Contact Testing
Fully Automated
Real-time Results
Automotive applications with THz technology
Vent Cap Presence Inspection in
Lead-Acid Batteries.
Multi-Layer Paint Coating
Inspection
Electrode Coating Thickness Measurement in EV Batteries.
Vent Cap Presence Inspection
TeraNIM™ – Automotive inspects vent-cap presence in lead-acid batteries.
- Vent-cap presence / absence detection and clear identification of acceptable & defective assemblies
- Reliable detection of vent caps beneath sealed covers
- Single-side, non-contact inspection through plastic covers
- Automation-ready for inline production inspection
Paint Coating Thickness Measurement
TeraNIM™ – Automotive measures multi-layer paint coating thickness on metal or plastics.
- In a single scan, all layer’s thicknesses can be measured automatically.
- Accurately measures individual layers: primer, basecoat, and clear coat—even on curved surfaces.
- Seamlessly integrates with robotic arms and production lines for continuous, contactless inspection.
- Identifies hidden defects such as poor adhesion or air pockets that traditional methods can’t detect
Electrodes Coating Inspection
TeraNIM™ – Automotive measures electrode coating thickness in EV batteries.
- Detects edge-to-center variations, thin spots, and over-coated regions.
- Identification of micro-cracks, mechanical damage, and non-uniform porosity affecting performance.
Detection of hidden air gaps and poor adhesion to the current collector
- Measures individual layers and coating-collector interfaces.
Integrated PC and software package for real-time measurement and data analysis
- Dielectric properties and material characteristics can be measured.
- Obtain both time domain and frequency domain signals.
- Both spectroscopy and imaging measurements.
- Automated motorized stages for imaging.
Multi-Layer Measurement
- All Dielectric materials can be measured
- Measure thickness of each layer individually
- Compact and mobile
Efficacious and Accurate
- Real Time Measurement
- Non-Contact Measurement
- Accuracy with 0.1μm
User-Friendly Integration
- Offline system
- In-line system
- Auto Data saving and report generation
Safety First
- Terahertz waves are harmless to humans
- No protection required
- No moving parts
Terahertz Specification
| Spectral Range | 0.5 – 3.5 THz |
|---|---|
Dynamic Range |
> 50 dB |
Average Power |
100μW |
Total Scan Range |
330 ps to 600 ps, and can extend up to 1200 ps depending on the application |
Scan Speed |
> 5ps/s |
THZ Frequency Resolution |
< 1.2GHz |
Laser Outputs Ports |
1550 nm, FC/APC, PM fibre |
Imaging Specification
| Travel Range | 75 mm x 75 mm x 75 mm ( customizable ) |
|---|---|
Resolution X – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Y – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Z – Axis |
Stage resolution < 10 μm |
Speed |
10 mm/sec |
Sensor Integration |
Camera / Depth Sensor / Laser |
Note: Turnkey system is customizable based on application requirements.
- Download TeraNIM™ Brochure
TeraNIM™ - Oil & Gas
Defect detection in GFRP
|
Coating Inspections
Thickness Measurement
Defect Detection
Oil & Gas applications with THz technology
MDPE/HDPE Pipe Weld Inspection
GFRP Thickness Measurement & Delamination Detection
Polymer Pipeline Coating Inspection
MDPE/HDPE Pipe Weld Inspection
TeraNIM™ – Oil & Gas: MDPE & HDPE Pipe Weld Inspection.
Automatic non-contact inspection of MDPE and HDPE pipe weld joints
Detection of incomplete fusion and weak welds in MDPE/HDPE pipelines
Identification of internal voids, air gaps, and porosity within pipe weld areas
Detection of cracks and lack of penetration in pipe weld joints
Measurement of weld bead thickness and uniformity for plastic pipe joints
GFRP Thickness Measurement
TeraNIM™ – Oil & Gas: GFRP Thickness Measurement & Delamination Detection.
Automatic GFRP thickness measurement for pipes, panels, and structural components used in oil and gas industries
Detection of internal delamination and layer separation in GFRP without damaging the materials
- Identification of hidden voids, air pockets, and manufacturing defects inside GFRP structures
Inspection of surface and sub-surface cracks or mechanical damage caused by pressure, stress
Polymer Pipeline & Coating Inspections
TeraNIM™ – Oil & Gas: Polymer Pipe Coating Thickness Measurement
Accurate measurement of polymer pipe wall thickness and coating thickness across the pipeline surface
Detection of coating delamination, disbondment, and adhesion failures
Identification of internal voids, air gaps, and manufacturing defects
Detection of cracks, mechanical damage, and surface degradation
Integrated PC and software package for real-time measurement and data analysis
- Dielectric properties and material characteristics can be measured.
- Obtain both time domain and frequency domain signal.
- Both spectroscopy and imaging measurements.
- Automated motorized stages for imaging.
Multi-Layer Measurement
- All Dielectric materials can be measured
- Measure thickness of each layer individually
- Compact and mobile
Efficacious and Accurate
- Real-Time Measurement
- Non-Contact Measurement
- Accuracy with 0.1μm
User-Friendly Integration
- Offline system
- In-line system
- Auto Data saving and report generation
Safety First
- Terahertz waves are harmless to humans
- No protection required
- No moving parts
Terahertz Specification
| Spectral Range | 0.5 – 3.5 THz |
|---|---|
Dynamic Range |
> 50 dB |
Average Power |
100μW |
Total Scan Range |
330 ps to 600 ps, and can extend up to 1200 ps depending on the application |
Scan Speed |
> 5ps/s |
THZ Frequency Resolution |
< 1.2GHz |
Laser Outputs Ports |
1550 nm, FC/APC, PM fibre |
Imaging Specification
| Travel Range | 75 mm x 75 mm x 75 mm ( customizable ) |
|---|---|
Resolution X – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Y – Axis |
< 250 μm* ( Stage resolution < 10 μm ) |
Resolution Z – Axis |
Stage resolution < 10 μm |
Speed |
10 mm/sec |
Sensor Integration |
Camera / Depth Sensor / Laser |
Note: Turnkey system is customizable based on application requirements.
- Download TeraNIM™ Brochure
